Content filtering can be set up for the whole network. It will apply to all devices that are connected to your router, whether it be by WiFi or with an Ethernet cable. The filters can be enabled using the motosync App.

Filter types

There are three filters that can be applied to the network as a whole. These filters will affect all devices connected to your network. If a device attempts to access a site that could be malicious, contain ads, or have adult themes, the user will be directed to a page blocking access to the site.

Security Plus - Block known malicious websites

Ad Privacy - Block ads and their tracking platforms

Adult Block - Block adult websites

Please note, the Adult Block filter is designed to hide adult content, but no filter is 100% accurate. To further block adult sites, we recommend adding the domains to the Profile Block lists.

Enabling filters

To enable Full Home Filters, please follow these directions.

1. 1. 1. Navigate to the Network page of the app.
      2. Scroll down to the heading Full Home Filter. It will be located between the Security section and Speed test connection.
      3. By default, the filers will be turned off. Tap the Turn on link in the upper right-hand corner of the square.
      4. Toggle the filters you would like to enable for your network, ie. Security Plus, Ad Privacy, and Adult Block.

If you return to the main Network page and scroll down to the Full Home Filter section, you will be shown which filters have been enabled. Below is an example of a home with Security Plus and Adult Block enabled.

Disabling filters

To disable Full Home Filters, please follow these directions.

1. 1. 1. Navigate to the Network page of the app.
      2. Scroll down to the heading Full Home Filter. It will be located between the Security section and Speed test connection.
      3. Tap the Manage link in the upper right-hand corner of the square.
      4. Toggle the filters you would like to disable for your network, ie. Security Plus, Ad Privacy, and Adult Block.

Filter search

Are you curious if a website may be blocked by a content filter you enabled? You can check using the Filter Search.

1. 1. 1. Navigate to the Network page of the app.
      2. Scroll down to the heading Full Home Filter. It will be located between the Security section and Speed test connection.
      3. Tap the Manage link in the upper right-hand corner of the square.
      4. On the Full Home Filter page, tap on the Filter search button.
      5. In the Enter a website address, you can type the beginning characters of a website or the full address.

Search results examples

Not blocked by our filters:

Blocked by one of our filters: